Assemble Your TerraSol Reformer

The steps

  1. Unfold the frame until it locks flat.
  2. Drop each pulley riser in at your preferred height and insert the pin to lock it.
  3. Drop the pegs into the holes on the carriage and screw them tight.
  4. Attach the shoulder pads to the carriage. Slide them to match your shoulder width.
  5. Drape the rope over the peg, pass the other end through the pulley, then thread it through the rope lock. Repeat on the other side.
  6. Unscrew both ends of the hook strap, attach them to the hooks, and screw until secure.
  7. Drop the rubber carriage stoppers into the track. Set them based on your height (the Willow fits anyone from 5'0" to 6'4").
  8. Drop the platform extender into the slot at the foot of the reformer. The jump board goes in the same slot the same way.
  9. To set the height, press and hold the buttons on both sides of a leg, lift or lower it, then tighten the screw. Repeat on all four legs.
  10. Hang your springs on the gear bar: 2 yellow (light), 2 green (medium), 2 red (heavy). Move them to different positions for more or less tension. That's it.

Something not right?

If a part is missing, a spring feels off, or the crate arrived damaged, email us at support@willowpilates.com with your order number and a photo. We'll sort it out fast. Your reformer is covered by a limited lifetime warranty, and you've got 60 days from delivery to decide it's right for you.